Viewers interested in Italian television channels can receive Onda Novara TV through satellite broadcasting on Eutelsat 9B. The channel offers Italian-language television content and is available as a free-to-air service, making it accessible to compatible satellite receivers without a paid subscription.
Finding the correct frequency is important because modern satellite transmissions use specific technical parameters that must be entered correctly into the receiver. In the case of Onda Novara TV, the transmission uses DVB-S2 and 16APSK modulation, so the receiver must support these standards.
This guide explains the current satellite frequency of Onda Novara TV, the required reception parameters, and how to add the channel manually.
Onda Novara TV Frequency on Eutelsat 9B
Onda Novara TV is currently available on Eutelsat 9B at 9.0° East.
The channel can be searched using the following parameters:
Frequency: 12303 MHz
Polarization: Vertical (V)
Symbol Rate: 31400
FEC: 2/3
System: DVB-S2
Modulation: 16APSK
Video Format: MPEG-4 HD 1080
Language: Italian
Access: Clear / Free-to-Air (FTA)
Since the transmission is listed as free-to-air, viewers with compatible equipment can receive the channel without requiring a subscription to an encrypted television platform.
How to Add Onda Novara TV to Your Receiver
Adding Onda Novara TV manually is straightforward if your satellite dish is already aligned with Eutelsat 9B.
Start by opening the Installation, Satellite Setup, or Antenna Settings menu on your receiver.
Select Eutelsat 9B at 9.0° East from the satellite list. Then open the manual transponder search option.
Enter the following information:
12303 V 31400
Make sure the receiver is set to DVB-S2 if this option is available in your installation menu.
After entering the parameters, check the signal quality. If the transponder is being received correctly, start the scan and wait for the receiver to find the available services.
Once the search is complete, save Onda Novara TV to your channel list.
Why Is Onda Novara TV Not Appearing?
If the channel does not appear after entering the frequency, there are several possible explanations.
The first thing to check is whether your dish is actually aligned with Eutelsat 9B at 9.0° East. Selecting the satellite in the receiver menu does not change the physical position of the dish.
Other possible causes include:
- Incorrect frequency
- Wrong polarization
- Incorrect symbol rate
- Weak signal quality
- Incorrect LNB settings
- Faulty coaxial cable
- Incorrect DiSEqC port
- Dish misalignment
- Receiver incompatibility with 16APSK
Because Onda Novara TV uses DVB-S2 with 16APSK modulation, receiver compatibility should also be taken into consideration.
Onda Novara TV Shows 0% Signal
If your receiver displays 0% signal when you select 12303 V 31400, begin by checking the selected satellite.
Your dish needs to be aligned with Eutelsat 9B. If it is pointed toward another satellite, the receiver will not be able to lock onto this transponder.
Next, inspect the coaxial cable and connectors between the LNB and receiver. A loose connector or damaged cable can cause complete signal loss.
If your system uses multiple LNBs, also check the DiSEqC settings and make sure the correct port has been assigned to Eutelsat 9B.
Signal Strength but No Signal Quality
A receiver can sometimes display signal strength while the signal quality remains at zero.
This does not necessarily mean that the transponder is working correctly. The receiver may be detecting an electrical signal from the LNB without successfully locking onto the desired satellite transmission.
Check the following:
- Correct satellite
- Correct frequency
- Correct polarization
- Correct symbol rate
- Correct LNB settings
- Accurate dish alignment
When adjusting the dish, signal quality is generally the more important indicator for determining whether the receiver has successfully locked onto the transponder.
Does Onda Novara TV Require a Subscription?
No paid subscription is indicated for this transmission.
Onda Novara TV is listed as Clear / Free-to-Air, meaning the service is transmitted without encryption.
However, free-to-air reception still requires a properly aligned satellite dish, a compatible LNB, suitable cabling, and a receiver capable of handling the transmission parameters.
What Receiver Is Needed?
Onda Novara TV uses DVB-S2 with 16APSK modulation.
Therefore, viewers should make sure their satellite receiver supports this transmission standard.
The channel is also transmitted in MPEG-4 HD 1080, so an HD receiver capable of decoding MPEG-4 video is recommended for proper viewing.
Older receivers may not support every DVB-S2 modulation mode, so checking the receiver specifications can help avoid reception problems.
How to Improve Onda Novara TV Signal
If you can receive the transponder but the signal quality is weak, several steps can help improve reception.
First, make sure the dish is accurately aligned with Eutelsat 9B. Fine adjustments can make a noticeable difference, especially when receiving a particular transponder.
The LNB should also be positioned correctly and securely attached to the dish arm.
Check the coaxial cable for damage, especially if it is installed outdoors. Water entering connectors can cause corrosion and signal loss over time.
Finally, make sure there are no significant obstacles between the dish and the satellite direction.
Can Weather Affect Reception?
Yes. Heavy rain can temporarily reduce satellite signal quality.
The effect can be more noticeable when receiving a weaker transponder or when the dish has limited reception margin.
If Onda Novara TV disappears during heavy rain and returns when the weather improves, this may be normal rain fade rather than a permanent problem.
If the signal remains weak after the weather clears, the dish alignment, LNB, cable, and connectors should be inspected.
Manual Scan or Blind Scan?
A manual scan is recommended when you already know the Onda Novara TV frequency.
Simply enter:
12303 V 31400
and start the transponder scan.
A blind scan can also be useful when you want the receiver to search the entire Eutelsat 9B satellite for active transponders.
However, blind scanning may add many channels, including duplicates and services you do not need. Manual scanning is therefore faster when the correct parameters are already available.
What Does FTA Mean?
FTA stands for Free-to-Air.
A free-to-air satellite channel is transmitted without encryption, so viewers do not need a subscription or decryption card to watch it.
However, FTA does not mean that the channel can be received from anywhere. The satellite’s coverage area, beam strength, dish size, and geographical location all affect reception.
Why Does the Channel Work on One Receiver but Not Another?
If Onda Novara TV works correctly on one receiver but not another, the second receiver may have different technical capabilities.
Since the transmission uses DVB-S2 and 16APSK, an older receiver may fail to lock onto the transponder even though the satellite dish and LNB are working properly.
Checking the specifications of the receiver is therefore important when troubleshooting the channel.
Frequently Asked Questions
What is the Onda Novara TV frequency?
The listed frequency is 12303 MHz Vertical (V) with a symbol rate of 31400 and FEC 2/3.
Which satellite broadcasts Onda Novara TV?
Onda Novara TV is listed on Eutelsat 9B at 9.0° East.
Is Onda Novara TV free?
Yes. The transmission is listed as Clear / Free-to-Air (FTA).
Is Onda Novara TV available in HD?
Yes. The transmission is listed in MPEG-4 HD 1080.
What modulation does Onda Novara TV use?
The channel uses DVB-S2 with 16APSK modulation.
Why can’t my receiver find Onda Novara TV?
Check that your dish is aligned with Eutelsat 9B, then verify 12303 V 31400, the LNB settings, signal quality, and receiver compatibility with DVB-S2/16APSK.
The current Onda Novara TV satellite transmission provides an easy way for viewers with suitable equipment to access the Italian-language channel.
On Eutelsat 9B at 9.0° East, the channel is listed on 12303 MHz Vertical, with a 31400 symbol rate and 2/3 FEC. The transmission uses DVB-S2, 16APSK, and MPEG-4 HD 1080, and is listed as Free-to-Air.
If the channel does not appear after a manual scan, the first things to check are the satellite position, dish alignment, LNB settings, cable connections, and receiver compatibility. Once these are correctly configured, the channel should be detectable through a standard transponder scan.
