Tennis fans looking for a dedicated channel to follow live matches, tournaments, highlights, and tennis-related programs may be interested in Super Tennis Channel. The channel is known for its focus on tennis and provides viewers with extensive coverage of the sport.
Finding the correct Super Tennis frequency can sometimes be difficult because satellite channels may use different transponders depending on the satellite.
In addition, reception depends on the location of the viewer, the satellite dish, the LNB, and the receiver specifications.
In this guide, we explain the available Super Tennis frequencies on the relevant satellites and how to add the channel manually to your receiver.
Super Tennis Channel Frequency on Hotbird 13F
Super Tennis is available through Hotbird 13F at 13.0° East.
The main frequency is:
Frequency: 12418 MHz
Polarization: Vertical (V)
Symbol Rate: 29900
FEC: 3/4
System: DVB-S2
Modulation: 8PSK
Video: MPEG-4 HD
Encryption: VideoGuard
An alternative frequency is also listed on the same satellite:
Frequency: 11843 MHz
Polarization: Vertical (V)
Symbol Rate: 29900
FEC: 3/4
The Hotbird transmission uses VideoGuard encryption through the Sky Italia platform. Therefore, receiving the signal and finding the channel in a scan does not necessarily mean that the channel can be watched without authorized access.
Super Tennis Channel Frequency on Eutelsat 9B
Super Tennis is also listed on Eutelsat 9B at 9.0° East.
The transmission parameters are:
Frequency: 12341 MHz
Polarization: Vertical (V)
Symbol Rate: 31400
FEC: 2/3
System: DVB-S2
Modulation: 16APSK
Video: MPEG-4 HD 1080
Encryption: Free / Stream
This transmission uses DVB-S2 and 16APSK modulation. Therefore, the receiver must support these standards to receive and decode the transmission correctly.
How to Add Super Tennis Manually
Adding Super Tennis to a satellite receiver is relatively simple when the correct transponder information is available.
First, open the receiver’s Installation or Satellite Setup menu.
Select the satellite corresponding to your dish position. If your dish is pointed toward Hotbird, select Hotbird 13F. If your dish is aligned with Eutelsat 9B, select Eutelsat 9B.
Next, open the Manual Scan or Transponder Search option and enter the required frequency, polarization, and symbol rate.
For Hotbird, you can start with:
12418 V 29900
You can also test:
11843 V 29900
For Eutelsat 9B, enter:
12341 V 31400
After entering the parameters, check the signal quality. If the receiver locks onto the transponder, start the scan and save the channels found.
Why Is Super Tennis Not Appearing?
There are several reasons why Super Tennis may not appear after entering the frequency.
The most common reason is that the satellite dish is not pointing toward the correct satellite. A receiver cannot receive a satellite transmission simply by selecting the satellite name from its menu.
The physical dish must also be aligned with the corresponding orbital position.
Other possible causes include an incorrect frequency, wrong polarization, incorrect symbol rate, weak signal, faulty LNB, damaged cable, or incorrect DiSEqC settings.
It is also possible that the transmission parameters have changed since the frequency information was published.
Super Tennis Shows 0% Signal
If the receiver shows 0% signal after entering one of the Super Tennis frequencies, begin by checking the selected satellite.
Make sure the physical dish is actually pointed toward the satellite you selected in the receiver.
Next, check the coaxial cable connecting the LNB to the receiver. Make sure the F-connectors are firmly attached and that there is no visible damage or corrosion.
The LNB should also be checked, particularly if other channels on the same satellite are showing no signal.
If you are using multiple LNBs, verify the DiSEqC port. Selecting the wrong port can cause the receiver to show 0% signal even when the satellite equipment is working correctly.
Signal Strength Is High but Quality Is 0%
Some receivers display signal strength even when there is no usable satellite lock.
If the signal strength is high but the quality remains at 0%, the dish may be pointing toward another satellite or the transponder information may be incorrect.
This is why signal quality is particularly important when adjusting a satellite dish.
Try another known active transponder on the same satellite. If other transponders also show no quality, the problem is more likely to be related to dish alignment, LNB settings, cable connections, or the reception equipment.
Does the Hotbird Transmission Require a Subscription?
The Hotbird transmission listed for Super Tennis uses VideoGuard encryption.
This means that the frequency can be entered and detected by a compatible receiver, but the encrypted service may require authorized access.
Therefore, viewers should distinguish between receiving a satellite signal and having permission to watch an encrypted channel.
What Receiver Is Required?
The receiver should support the transmission technology used by the selected Super Tennis transponder.
The Hotbird transmission uses DVB-S2 and 8PSK, while the Eutelsat 9B transmission uses DVB-S2 and 16APSK.
A modern HD satellite receiver is generally preferable, but viewers should check the exact technical specifications of their equipment before attempting to receive the channel.
The receiver should also support MPEG-4 HD decoding for HD transmissions.
How to Improve Super Tennis Reception
A strong and stable satellite signal depends on several factors.
First, the dish should be accurately aligned with the selected satellite. Even a small change in the dish position can affect reception, particularly with weaker satellite beams.
The LNB should also be correctly installed and rotated. The position of the LNB can affect the reception of vertical and horizontal polarizations.
The coaxial cable should be in good condition, and all outdoor connectors should be protected from moisture.
If the signal remains weak despite correct alignment, the dish size may also be an important factor. Reception requirements can vary depending on the satellite beam and the viewer’s geographical location.
Can Rain Affect Super Tennis Reception?
Yes. Heavy rain can temporarily reduce satellite signal quality.
This phenomenon is commonly known as rain fade and can be more noticeable with certain satellite transmissions and reception setups.
If Super Tennis becomes unavailable during heavy rain but returns after the weather improves, the satellite equipment may not necessarily be faulty.
However, if the signal remains weak after the weather returns to normal, the dish alignment, LNB, cable, and connectors should be checked.
Manual Scan or Blind Scan?
A manual scan is the better option when you already know the correct Super Tennis frequency.
It allows you to search a specific transponder without adding a large number of unnecessary channels.
A blind scan can be useful when you are not sure about the current frequency. The receiver searches the selected satellite for active transponders and then scans the available services.
However, blind scanning may produce duplicate channels or outdated services, so a manual scan is usually more convenient when the correct frequency is known.
What If Only Super Tennis Is Missing?
If other channels are working normally but Super Tennis is not detected, check the specific transponder parameters first.
The problem may be related to the frequency, symbol rate, polarization, modulation, or the current status of the transmission.
If other channels using the same transponder are also missing, check the reception quality before changing any equipment.
A weak signal can prevent the receiver from locking onto a specific transponder even when stronger transponders on the same satellite continue to work.
Frequently Asked Questions
What is the Super Tennis frequency on Hotbird?
The main listed frequency is 12418 MHz Vertical with a symbol rate of 29900 and FEC 3/4. An alternative frequency of 11843 MHz is also listed with the same polarization and symbol rate.
What is the Super Tennis frequency on Eutelsat 9B?
The listed frequency is 12341 MHz Vertical with a symbol rate of 31400 and FEC 2/3.
Is Super Tennis free on Hotbird?
The Hotbird transmission uses VideoGuard encryption, so access to the channel may require an authorized subscription.
Does Super Tennis broadcast in HD?
The listed transmissions use MPEG-4 HD, with the Eutelsat 9B transmission specified as HD 1080.
Why does my receiver show 0% signal?
Check the selected satellite, dish alignment, LNB settings, cable connections, DiSEqC configuration, and transponder parameters. Any of these can result in a 0% signal reading.
Can I find Super Tennis with a blind scan?
Yes. A blind scan can search for active transponders on the selected satellite, but a manual scan is preferable when the correct frequency is already known.
Finding the correct Super Tennis Channel frequency is essential for receiving the channel successfully, but the frequency alone is not enough. The satellite dish must be correctly aligned, the LNB and cable must be working properly, and the receiver must support the required transmission standards.
For Hotbird 13F at 13.0° East, Super Tennis is listed on 12418 V 29900, with 11843 V 29900 also available as an alternative transmission. The service uses DVB-S2, 8PSK, and VideoGuard encryption.
On Eutelsat 9B at 9.0° East, the listed transmission is 12341 V 31400, using DVB-S2, 16APSK, and MPEG-4 HD 1080.
Before scanning, always verify the latest transponder information and make sure your satellite equipment is properly aligned and configured. This will give you the best chance of receiving Super Tennis with a stable signal.
